No
*
Does not initialize the wired network data stored in NVM.
*
Factory default menu setting
PS Data Format
Purpose:
To set the PS data communications protocol. To make any changes effective, turn off the printer and
then turn it back on.
Values:
Auto
*
Sets the PS data communications protocol automatically.
Standard
Sets the PS data communications protocol to
Standard
.
BCP
Sets the PS data communications protocol to
BCP
.
TBCP
Sets the PS data communications protocol to
TBCP
.
*
Factory default menu setting
Fax Settings
Use the
Fax Settings
menu to configure the basic fax settings.
Ans Select
Purpose:
To specify the default fax receiving mode.
Values:
TEL Mode
The printer does not automatically receive faxes. To receive an incoming fax,
you need to pick up the handset of the connected external telephone and press
the 2-digit code.
FAX Mode
*
The printer automatically receives faxes.
TEL/FAX Mode
When the printer receives an incoming fax, the external telephone rings for the
period of time specified for
Auto Ans. TEL/FAX
, and then the printer
automatically receives a fax. If an incoming call is not a fax, the printer beeps
from the internal speaker indicating that the call is a telephone call.
Ans/FAX Mode
The printer shares the telephone line with an answering machine and monitors
the line for a fax tone. It will pick up an incoming call if it hears a fax tone. This
option is not available in regions where a serial phone system is employed.
AL-MX200 Series User’s Guide
Using the Operator Panel Menus and Keypad
282