manualshive.com logo in svg

Epson AL-MX200 Series, User Manual

Share
Download
Epson AL-MX200 Series User Manual Download Page 211

Scanning to a USB Storage Device

The Scan to USB Memory feature allows you to scan documents and save the scanned data to a USB
storage device. To scan documents and save them, follow the steps below:

1. Load a document(s) face up on the Automatic Document Feeder (ADF) with the top edge going in

first; or place a single document face down on the document glass and close the document cover.

See Also:

❏

“Making Copies From the Automatic Document Feeder (ADF)” on page 165

❏

“Making Copies From the Document Glass” on page 163

2. Insert a USB storage device into the front USB port on your printer.

USB Memory

 appears.

3. Select 

Scan to

, and then press the 

 button.

4. Select 

Save to USB Drive

 or a folder to save a file, and then press the 

 button.

5. Select scanning options as required.

6. Press the 

 (

Start

) button.

When the scan is complete, the LCD panel displays a prompt for another page. Select 

No

 or 

Yes

,

and then press the 

 button.

If you have selected 

Yes

, select 

Continue

 or 

Cancel

, and then press the 

 button.

AL-MX200 Series     User’s Guide

Scanning     

211

Summary of Contents for AL-MX200 Series



























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands