Epson AL-MX200 Series User Manual Download Page 44

Page: 44 / 410

You can turn on/off either protocol using the operator panel, or use EpsonNet Config to turn on/off
the DHCP protocol.

Note:

You can print a report that includes the printer’s IP address. On the operator panel, press the

System

button, select

Report / List

, press the

button, select

System Settings

, and then press the

button. The IP address is listed on the System Settings page.

Using the Operator Panel

To turn on/off either the DHCP or the AutoIP protocol:

1. On the operator panel, press the

System

button.

2. Select

Admin Menu

, and then press the button.

3. Select

Network

, and then press the button.

4. Select

TCP/IP

, and then press the button.

5. Select

IPv4

, and then press the button.

6. Select

Get IP Address

, and then press the button.

7. Select

DHCP/AutoIP

DHCP

, and then press the button.

Using EpsonNet Config

To turn on/off the DHCP protocol:

1. Launch your web browser.

2. Enter the IP address of the printer in the address bar, and then press the

Enter

key.

EpsonNet Config appear on your browser.

3. Select

Properties

4. Select

TCP/IP

from the

Protocol Settings

folder on the left navigation panel.

5. In the

IP Address Mode

field, select the

DHCP/AutoIP

option.

6. Click the

Apply

button.

AL-MX200 Series User’s Guide

Printer Connection and Software Installation

Summary of Contents for AL-MX200 Series



























































































































































































































































































































































































































Search results

Summary of Contents for AL-MX200 Series

Reviews:

Brands by name

Popular brands

Epson AL-MX200 Series, User Manual

Search results

Summary of Contents for AL-MX200 Series

Reviews:

Brands by name

Popular brands