manualshive.com logo in svg

Epson AL-MX200 Series, User Manual

Share
Download
Epson AL-MX200 Series User Manual Download Page 390

Recycling Supplies

❏

For environmental protection and efficient use of resources, Epson reuses returned toner
cartridges and drums (photoreceptors) to make recycle parts, recycle materials or energy
recovery.

❏

Proper disposal is required for toner cartridges no longer needed. Do not open toner cartridges.
Return them to your local Epson representative.

Storing Consumables

Store consumables in their original packaging until you need to use them. Do not store consumables
in:

❏

Temperatures greater than 40 ˚C (140 ˚F).

❏

An environment with extreme changes in humidity or temperature.

❏

Direct sunlight.

❏

Dusty places.

❏

A car for a long period of time.

❏

An environment where corrosive gases are present.

❏

An environment with salty air.

Managing the Printer

Checking or Managing the Printer with EpsonNet Config

When the printer is installed in a TCP/IP environment, you can check printer status and configure
settings using a web browser on a network computer. You can also use EpsonNet Config to check the
remaining volume of consumables and the paper loaded in this printer.

Note:

When using the printer as a local printer, you cannot use EpsonNet Config. For details on checking the
status of a local printer, refer to “Checking Printer Status with Status Monitor (Windows Only)” on
page 391.

AL-MX200 Series     User’s Guide

Maintenance     

390

Summary of Contents for AL-MX200 Series



























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands