manualshive.com logo in svg

Epson AL-MX200 Series, User Manual

Share
Download
Epson AL-MX200 Series User Manual Download Page 15

USB Direct Print

You can print directly from your USB storage
device without starting your computer and an
application.

For more information, see “Direct Printing
Using a USB Storage Device” on page 146.

2-in-1 Copy

You can copy two original pages on one side of a
single sheet of paper to save paper consumption.

For more information, see “Multiple Up” on
page 176.

ID Card Copy

You can copy both sides of an ID card on one
side of a single sheet of paper in its original size
by selecting 

ID Card Copy

 on the operator

panel.

For more information, see “Copying an ID
Card” on page 181.

Scan to E-Mail

You can directly send scanned data as an e-mail
attachment. You can choose destination e-mail
addresses from the Address Book or enter
addresses directly using the numeric keypad.

For more information, see “Sending an E-Mail
With the Scanned Image” on page 212.

AL-MX200 Series     User’s Guide

Preface     

15

Summary of Contents for AL-MX200 Series



























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands