manualshive.com logo in svg

Epson AL-MX200 Series, User Manual

Share
Download
Epson AL-MX200 Series User Manual Download Page 94

6. Select the printer, and then click 

Next

. If the printer is not listed, click 

Back

 and enter the path to

the printer in the text box.

For example:\\[server host name]\[shared printer name]

The server host name is the name of the server computer that identifies it to the network. The
shared printer name is the name assigned during the server installation process.

If this is a new printer, you may be prompted to install a print driver. If no system driver is
available, specify the location where the driver is available.

7. Select 

Yes

 if you want your printer to be set as the default printer, and then click 

Next

.

8. Click 

Finish

.

For Windows Vista and Windows Vista 64-bit Edition

1. Click 

Start

 — 

Control Panel

 — 

Hardware and Sound

 — 

Printers

.

2. Click 

Add a printer

 to launch the 

Add Printer

 wizard.

AL-MX200 Series     User’s Guide

Printer Connection and Software Installation     

94

Summary of Contents for AL-MX200 Series



























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands