3.
Hold the card along the top corners and guide it toward the
slot, as shown below.
Once the connectors reach the slot, push the card in firmly
(but carefully). You should feel the card fit into place. If it
does not go in smoothly, do not force it; pull the card all the
way out and try again.
4.
Secure the end of the card to the computer with the retaining
screw.
5.
Replace the computer’s cover; see “Replacing the Cover.”
Then see “Post-installation Procedures” for instructions on
configuring your computer with your new option card.
3-22 Installing and Removing Options
