Removing the Cover
You need to remove the computer’s cover to install any of the
options described here or to install or remove a disk drive (as
described in Chapters 4 and 5). Follow these steps:
1.
Turn off the computer and then any peripheral devices.
2.
Disconnect the computer’s power cable from the electrical
outlet and from the back panel. Also disconnect any other
cables that are connected to the computer.
3.
Turn the computer around so the back panel is facing you.
4.
Remove the screws securing the cover to the back panel
(three on the slimline computer and six on the tower
computer), as shown below. (Save the screws to reinstall
later.)
3-2 Installing and Removing Options
