Set jumper JPl back to the Off position. Then turn on the
computer again. If you want to set a new password, use SETUP
as described under “Selecting the Security and Anti-Virus
Options” in Appendix B.
Software Problems
Your operating system won’t start after you installed the PCI
IDE drivers.
If you installed PCI IDE drivers for another operating system,
such as UNIX,‘” make sure you followed the instructions in the
README file for the drivers. See “Installing the PCI IDE
Drivers” in Appendix B for instructions.
The application program does not start.
Check that you are following the correct procedure for starting
the program and that it is installed correctly. If you need help,
contact the software manufacturer.
The application program cannot read from or write to the
hard disk drive.
If you have enabled the Hard Disk Standby Timer option in
SETUP, your application may be timing out during the few
seconds when the hard disk drive returns to its full speed.
Disable this option in SETUP as described under “Setting the
Green PC Options” in Appendix B.
Your application has locked the computer, making if
unresponsive to keyboard commands.
Reset the computer and try again. If resetting the computer does
not help, turn it off, wait 20 seconds, then turn it on again.
Troubleshooting 6-13
