2.
Remove any option cards that may be blocking your access
to the SIMM sockets; see “Removing an Option Card” for
instructions.
3.
Use your fingers or a small screwdriver to carefully pull
away the tabs that secure the SIMM at each end. The SIMM
falls to the side; remove it from the socket.
tabs
4.
Follow the same procedure to remove any other SIMMs.
5.
If you are inserting different SIMMs, follow the instructions
under “Inserting SIMMs” to install them.
6.
Replace any option cards you removed; see “Installing an
Option Card” for instructions.
7.
Replace the computer’s cover as described under “Replacing
the Cover.” Then see “Post-installation Procedures” for
instructions on configuring your computer with your new
memory size.
3-16
Installing and Removing Options
