4.
5.
6.
Replace the bracket as shown below and secure it to the back
panel with the four screws you removed earlier.
If there is a drive installed in the rear internal bracket, follow
steps 6 through 8 under “Installing a Drive in the Rear
Internal Bay” to reconnect the drive and power cables to the
drive.
If you have finished installing or removing drives, replace
the computer’s cover; see “Replacing the Cover” in
Chapter 3 for instructions. Then see “Running SETUP” in
Appendix B for instructions on defining your new drive
configuration.
5-22 Installing and Removing Tower Drives