3.
Remove the screws securing the drive on both sides.
4.
Reach behind the drive and gently push it out through the
front of the bay; then pull it out of the slot.
5.
Once you have removed the drive, replace the faceplate by
inserting one side of the plate, then gently pressing on the
other side until it snaps into place.
6.
If you removed the only IDE device connected to the
interface the device used, you may want to disconnect the
device cable from the system board and remove it from the
computer.
7.
Replace the drive mounting bracket. See “Replacing the
Bracket in the Computer” for instructions.
Installing and Removing Slimline Drives 4-23
