Laser
Service
3.2.3.4
Unit Removal
■
Do not touch the
unit except at the time of replacement.
■
Do not open the unit under any conditions.
Do not remove the
the
unit
any condition.
Do not loosen the 2 screws that secured with a black paint (shown in position A in the
Do not loosen the 2 screws (shown in position
the figure)
1. Open the top cover. Remove the imaging cartridge. Cover the imaging cartridge to protect it
from the light or place it in a dark area.
2. Remove the control panel. (Refer to Section
3. Remove
4. Remove
(Refer to
5. Disconnect connector
engine controller board
6. Remove 2
CC
screws
6) and CC screw
12), and remove
unit.
B
A
I
CC (M3
X
6)
‘ \ .
B
Board
Figure 3-13. Removing the
Unit
Rev. B
3-11