Pearl Mini User Guide
Single Touch streaming and recording control
In the example above, Single Touch control has been activated and both channels out of the
two total channels and/or recorders are recording successfully. There is no streaming
activity because there are no channels configured for Single Touch streaming.
An error icon displays if there's a problem with the streaming and/or recording settings for one or more
of the channels and recorders. All other channels and recorders that are working correctly continue to
stream and record normally.
In this example, after pressing
Start
, both recorders/channels are recording properly but the
one channel configured for streaming is not streaming correctly.
To troubleshoot, investigate each channel's streaming configuration page using the Admin
panel and identify which channel isn't streaming. Then correct any streaming configuration
errors.
See
Specify channels for Single Touch streaming
and
Specify channels and recorders for Single Touch
for more information about configuring channels and recorders for Single Touch control.
Customize the Single Touch control display
You can use the Admin panel to customize how Single Touch control is displayed on the touch screen. The
start screen options for Single Touch control are:
l
Default
: The Single Touch control screen is accessed by tapping the
One Touch control icon
at
the bottom of the touch screen.
l
Single touch control
: The Single Touch control start screen displays automatically on the touch
screen when you power on the Pearl device. Operators can still navigate to other screens from the
Single Touch control screen by tapping the Home icon in the top right corner of the screen.
46
