Pearl Mini User Guide
Connect an SRT stream as an input
l
For caller/listener modes, you must know which mode the SRT source uses and configure the SRT
input on Pearl Mini to use the corresponding mode.
l
Caller mode can be used only for connection with the publicly accessed destination/source.
l
Listener mode can be used for connection with any source/destination (including within a
local network behind the firewall).
l
For example, if the SRT source is in caller mode, then the input must be in listener mode. For
an example SRT stream using caller/listener modes, see
Set up an SRT stream using caller
.
l
If AES encryption and a passphrase is required, consult your IT administrator for this information.
Pearl Mini supports 128 bits, 192 bits, and 256 bits AES encryption. Special characters are not
supported in the passphrase.
If AES encryption and a passphrase is configured, ensure this information is provided to the
SRT source. The SRT stream from the source must use the same AES and passphrase values,
see
Set AES encryption and a passphrase for SRT
.
Add an SRT stream as an input using the Admin panel
1. Log in to the Admin panel as
admin
, see
2. From the Inputs menu, select
Add input
and select
Add SRT input
. The SRT input configuration
page opens.
271
