Pearl Mini User Guide
Stop/start scheduled CMS events using the
touch screen
From the touch screen, tap the calendar icon to display the Events screen or wait for the Events screen to
appear automatically about five minutes before the event starts.
Tap
Start event
to start recording or webcasting right away. When you're done, tap the
square
stop
event button or just wait for the event to stop automatically at the scheduled time. After you confirm your
selection, the event recording uploads automatically to your CMS.
If there's more than five minutes before the next scheduled event, a
Create event
button for ad hoc
events appears beside the
Start event
button. For more about the different Events screens, see
event controls using the touch screen
Important information
l
The Pearl device must already be registered with your CMS to appear listed as a remote recorder
resource in the CMS. Contact your CMS administrator responsible for setting up hardware
encoders for your organization if the Pearl device isn't listed as a resource or the calendar icon
does not appear on the touch screen.
l
For Kaltura, each channel on the Pearl device corresponds to a separate video source, which are
treated as separate views for multi-view recordings.
l
For Kaltura, the channel used for live streaming is pre-configured by the Pearl administrator.
l
The number of channels on the Pearl device are pre-configured by the Pearl administrator.
However, you can physically connect different video sources to the video inputs on Pearl device.
434
