manualshive.com logo in svg

ENSTROM 280FX Series, Operator'S Manual

The ENSTROM 280FX Series Pilot's Manual is a comprehensive and indispensable resource for all pilots operating this remarkable aircraft. This manual is available for free download from manualshive.com, providing easy access to essential information, procedures, and specifications, enhancing flight safety and efficiency.

Share
Download
background image

8-4 

 

ENSTROM 280FX OPERATOR’S MANUAL 

 

 

 

 

Rev. 6 

Report No. 28-AC-020 

 

Feb 21/12 

 a. 

50-hour 

inspections 

 b. 

100-hour 

inspections 

 c. 

200-hour 

inspections 

 d. 

Lubrication 

intervals 

 e. 

Special 

instructions 

8-3. Maintenance 

All maintenance, preventive maintenance and alterations to 
the helicopter must be performed in accordance with the 
Maintenance Manual procedures by appropriately rated 

personnel. All maintenance performed requires a log book 
entry in the helicopter log or the engine log. These documents 
need not be carried in the helicopter but must be available to 

mechanics performing maintenance and inspections. 

8-4. Preventive Maintenance by the Pilot 

14 CFR, Part 43, Appendix A (c), defines work classified as 
preventive maintenance. Preventive maintenance may be 
performed by a certified pilot on a helicopter he or she owns 

or operates. The work must be performed in accordance with 
the Maintenance Manual and logged in the helicopter or 

engine log. 

NOTE 

Owners and operators of exported helicopters 

should check with their own NAA to determine the 
scope of allowed “preventive maintenance”. 

8-5. Servicing 

Servicing of the helicopter includes changing or 
replenishment of fuel, oil, lubrication, and other 

maintenance functions. 

 

This electronic document is not linked to a subscription for revision control or distribution. Refer to theTechnical 

Publications Status link under the Technical Support Page of the Enstrom Helicopter website for the current revision 

level of the 280FX Rotorcraft Flight Manual.

UNCONTROLLED COPY WHEN DOWNLOADED OR PRINTED

Summary of Contents for 280FX Series























































































































































































































































Reviews:

No comments

Related manuals for 280FX Series

Jamara Atlantique 040250 Instructions Manual preview
Atlantique 040250
Brand: Jamara Pages: 8
ProBoat HyperSport Owner'S Manual preview
HyperSport
Brand: ProBoat Pages: 20
Spin Master Air Hogs Helix Instructions preview
Air Hogs Helix
Brand: Spin Master Pages: 4
marklin Percy Manual preview
Percy
Brand: marklin Pages: 24
REVELL Sd.Kfz.251/1 Ausf.B Assembly Manual preview
Sd.Kfz.251/1 Ausf.B
Brand: REVELL Pages: 7
VQ Radio Control Model P-39 Q/N AIRACOBRA Building Instructions preview
P-39 Q/N AIRACOBRA
Brand: VQ Radio Control Model Pages: 12
Mega Bloks 3-in-1 Ride-On Firetruck Instructions Manual preview
3-in-1 Ride-On Firetruck
Brand: Mega Bloks Pages: 6
Hot Wheels BMG68 Instructions preview
BMG68
Brand: Hot Wheels Pages: 4
LGB 22261 Instructions Manual preview
22261
Brand: LGB Pages: 14
Faller 190138/1 Instructions Manual preview
190138/1
Brand: Faller Pages: 8
GRAUPNER E-TRAINER 140 Building Instructions preview
E-TRAINER 140
Brand: GRAUPNER Pages: 12
GREAT PLANES F-15 EAGLE Instruction Book preview
F-15 EAGLE
Brand: GREAT PLANES Pages: 53
Bestway 93208 Owner'S Manual preview
93208
Brand: Bestway Pages: 6
LEGO spongebob squarepants 3818 Assembly Manual preview
spongebob squarepants 3818
Brand: LEGO Pages: 84
Malibu Boats M235 2018 Owner'S Manual preview
M235 2018
Brand: Malibu Boats Pages: 200
Vollmer 47625 Mounting Instruction preview
47625
Brand: Vollmer Pages: 3
Rolly Toys Rolly Junior Loader Manual preview
Rolly Junior Loader
Brand: Rolly Toys Pages: 7
Kyosho Ford FIESTA S2000 Body Shelll Instruction Manual preview
Ford FIESTA S2000 Body Shelll
Brand: Kyosho Pages: 4

Brands by name

Popular brands

Load more brands