Eneo HDD-20, Installation Manual

Page: 73 / 92

OSD Manual
73
¾
FLIP
Users can track an object continuously when it passes through under the
Dome Camera with setting Flip to M.E. (mechanical flip).
z
M.E. (Mechanical Flip)
M.E. is a standard mechanical operation. As the Dome Camera tilts to
the maximum angle, it will pan 180°, and then continue tilting to keep
tracking objects.
NOTE:
Flip setting is manual-controlled only. If a Preset or a
point for other function (ex. Sequence) is set in the position
that can only be reached through FLIP motion, when Flip is
off, the position cannot be reached anymore.
z
IMAGE
IMAGE represents digital IMAGE FLIP, which enables users to keep
tracking objects seamlessly; under the mode, almost no delay occurs
in comparing with that under the M.E. mode.
NOTE:
The Privacy Mask function will be automatically
disabled if the Image Flip function is enabled, and “MASK
WILL BE SET OFF” Will be shown on the screen.
z
OFF
Select this item to disable the flip function.
z
EXIT SET
Exit <FLIP Setting> menu and go back to <SETUP MENU 2> to set
other functions.
NOTE:
To make the Dome Camera tilt between a specific range, such
as -10° to +100° or -10 ° to +190 ° , please go to next section ANGLE
ADJUSTER to set the angle range of tilt. Otherwise, the dome will tilt
90° as the default setting.
¾
ANGLE ADJUSTER
The item is for adjusting the angle range of tilt motion. The Range of the tilt
motion varies in different FLIP modes: the angle ranges from -10 ° to +100
°
in the M.E. FLIP and FLIP OFF modes and from -10
°
to +190
°
in the
IMAGE FLIP mode.