Eneo HDD-20, Installation Manual

Page: 10 / 92

Installation Guide
10
3.1.4 Camera Control Protocol Setting
Define the protocol you are going to use basing on the devices of your
surveillance system. Generally, use one protocol even the devices are
provided from different manufacturers. Please refer to the table below for all
supported protocols with their matching switch numbers and baud rate and
choose a protocol for your Camera. The table below shows various protocols
with their matching switch numbers and baud rate.
Switch No. Protocol Baud Rate
00
VCL 9600
01
Pelco D 2400
02
Pelco P 4800
04
Chiper 9600
05
Philips 9600
07
DSCP 9600
08
AD422 4800
09
DM P 9600
11
Pelco D 4800
12
Pelco D 9600
13
Pelco P 2400
14
Pelco P 9600
15
JVC 9600
21
Kalatel-485 9600
22
Kalatel-422 4800
Use the 6-bit dip switch (Camera Control Protocol Switch) to set your camera’s
control protocol and its baud rate. If select protocol “Pelco D”, which is of
switch no. 01 and baud rate 2400, for instance, set the SW-1 to “ON,” with the
rest to “OFF” as shown below.
For switch configuration details, please refer to User Manual > Appendix B:
Switch Settings Index Table.