Eneo HDD-20, Installation Manual

Page: 75 / 92

OSD Manual
75
¾
PASSWORD
The administrator can activate OSD Password function for security
concerns. Once the function is turned on, users are required to enter the
password every time when accessing to the OSD menu.
The password setting procedure is like the following:
8)
STEP 1: Choose a number with direction keys and then press the
<CAMERA MENU> key (ENTER) to input. For example: <0>
<CAMERA MENU>, <1> <CAMERA MENU>, <2> <CAMERA
MENU>, <3> <CAMERA MENU>.
PASSWORD: 0123
9)
STEP 2: In the second line, enter the same password again to confirm
the setting.
10)
STEP 3: Move the cursor to <SAVE> and press <CAMERA MENU> to
save the setting.
11)
STEP 4: Move the cursor to <EXIT> and press <CAMERA MENU> to
exit the password setting page.
If OSD Password function is enabled, when press the <CAMERA MENU>
key to enter the OSD menu, the password request message will be
displayed as shown below. Please enter the password, press <ENTER>
and then access to the OSD main menu.
NOTE:
When first time turning the Password Function on, please
enter the Master Passport to setup the new password.
The Master Password: 9527.
¾
OSD AUTO CLOSE
Users can specify the duration for OSD menu to stay on the screen. Time
selection ranges from 5 to 30 seconds. To keep the OSD menu stay on the
screen, please set this option to <OFF>.
¾
¾
SYSTEM RESET
Two types of system reset can be implemented under this item: