Eneo HDD-20, Installation Manual

Page: 76 / 92

OSD Manual
76
z
SYSTEM RESET
Select this function for system reboot. Press <ENTER> and system
reboot will start up.
z
DEFAULT SYSTEM
This function allows users to restore the camera to its factory default
state. Press <ENTER> and reset will start up.
¾
EXIT
Exit <SETUP MENU 2> and go back to <MAIN PAGE1> to set other
functions.
2.9 ID DISPLAY
Press the direction key down to turn the MAIN MENU page from 1 to 2, and
then the menu item <ID DISPLAY> will be shown on the top. Users are allowed
to choose whether the Dome Camera’s ID will be displayed on screen for
identifying the domes. For more information, please refer to
SDI Speed Dome
Camera User Manual .
Display the ID address of the selected dome on the right bottom of the screen
by turning it <ON>. To hide the ID address of the selected dome, set the item
<OFF>.
2.10 TITLE DISPLAY
Users are allowed to name a view area, where the title will be displayed on
screen for easy recognition.
Select <ON> to display the title set for a view area on screen while the camera
shooting the view area.
When <TITLE DISPLAY> is set <OFF>, no title will be displayed on screen
even titles have been set in advance.