Eneo HDD-20, Installation Manual

Page: 85 / 92

OSD Manual
85
z
EXIT & SAVE
Exit <AUTO> mode and go back to the <MAIN PAGE 2> to carry on
other function setups.
¾
MANUAL
z
IR MANUAL ON
Select the item to remove the IR cut filter; the camera will be in B/W
(Night) mode.
z
IR MANUAL OFF
Select the item to attach the IR cut filter; the camera will be in Color
(Day) mode.
z
EXIT & SAVE
Exit <MANUAL> mode and go back to the <MAIN PAGE 2> to carry
on other function setups.
2.18 ALARM SETTING
The integrated Speed Dome provides eight alarm inputs and one alarm output
(N.O. or N.C) to connect alarm devices. With this function, the Dome Camera
can cooperate with alarm system to catch events’ images. For wiring, please
refer to the installation guide and/or qualified service personnel. Adjustable
alarm parameters are listed as below.
¾
ALARM PIN
The dome provides 4 alarm inputs and 1 output (N.O. or N.C.). Select an
alarm connector which you want to set its alarm-related parameters with
this item, and then set its alarm-related parameters in the Alarm Setting
menu. For alarm pin definitions, please refer to the User Manual or
Installation Guide.
NOTE:
If two or more alarm pins are triggered at the same time,
smaller alarm pin number will have higher priority of being handled.
For example, if Alarm-1 and Alarm-3 are triggered simultaneously,
only Alarm-1 will actually be handled.
¾
ALARM SWITCH
The item is used to enable or disable the selected alarm pin function. Use
the left/right direction keys on the control keyboard to change the setting.