Eneo HDD-20, Installation Manual

Page: 30 / 92

Installation Guide
30
4.5.2 Corner Thin/Wide Box Mounting
Package Contents:
z
M8x16 Screw x4
z
Washer-8 x4
z
Spring Washer-8 x4
Items Needed:
z
Dome Camera
z
Power Cable
z
Ethernet Cable
z
Standard/ Compact Pendent Mount and equipped items (optional
accessory)
z
Corner Thin/Wide Box (optional accessory)
z
Mounting Kit (optional accessory)
z
Waterproof Rubber Screws and Screw Anchors for fixing the Corner
Thin/Wide Box
Tools Needed:
z
Tool for drilling
z
Tool for screwing
Follow the steps below to mount the Dome Camera with the Corner Thin/Wide
Box
and Standard/ Compact Pendent Mount.
1)
Make a cable entry hole on the wall to recess the cable(s).
2)
Fix the Corner Thin/Wide Box on the corner of the wall with proper screws
and screw anchors. Then run the cable(s) through the hole on the Corner
Mounting Plate.
3)
Fasten the Standard/ Compact Pendent Mount onto the Corner Thin/Wide
Box with the supplied screws and washers. Then thread the cable(s)
through the Standard/ Compact Pendent Mount with the cable(s) coming out
of the Pendent Mount’s outlet.
NOTE:
Please block the cable entry hole with the supplied sponge
to avoid insects entering the Pendent Mount. Refer to the
illustrations in section
4.4.2 Compact Pendent Mount > Step 4 .