Eneo HDD-20, Installation Manual

Page: 7 / 92

Installation Guide
7
3. Camera Setups and Cable Connections
Before installing or connecting the Dome Camera, please refer to this section
and complete preparations for dome setups and various switch settings.
There will be a PE cloth sheet covered inside the dome cover and a lens cap
on the lens for shipping protection. Follow the steps below to remove those
protective materials.
Step 1:
Unpack the dome package and take out the dome body.
Step 2:
Rotate and remove the protective cover.
Step 3:
Remove the PE cloth sheet and take off the lens cap.
Step 4:
Attach the dome cover to the dome body.
3.1 Dome Camera Setups
Before connecting the Dome Camera to other devices, please complete the
Dome Camera’s ID and communication switch setting. These switches are
located on the rear plate of the Dome Camera.