Eneo HDD-20, Installation Manual

Page: 82 / 92

OSD Manual
82
2.15 CRUISE
CRUISE is a route formed with manual operation, through adjusting pan, tilt
position and zoom parameters, which can be stored and recalled to execute
repeatedly.
¾
CRUISE LINE
Up to eight sets of Cruise routes can be created for one camera. Using
LEFT/RIGHT direction keys to select a line first and then follow the steps
below to start recording the Cruise route.
¾
RECORD START
Follow the description below to record the CRUISE path.
17)
STEP 1: Rotate the Dome Camera to a desired view area (for some
protocols, users may need to do it before entering the OSD), and
press <ENTER> to build the cruise path using the joystick on the
control device. The percentage of the memory buffer used will be
displayed on the screen.
18)
STEP 2: Pan, tilt and zoom the Dome Camera to form a path.
NOTE:
Beware of the memory size when building a Cruise route.
Once the buffer percentage reaches 100%, recording of the path
will stop.
¾
RECORD END
The cursor will be moved to <RECORD END> while building the Cruise
route; when the setting is completed, press <ENTER> to save the route.
¾
RUN CRUISE
After cruise setting is completed, press the <CAMERA MENU> key
(ENTER) to run the defined Cruise path.
¾
EXIT
Exit <CRUISE> menu and go back to the <MAIN PAGE 2> to carry on
other function setups.
NOTE:
Users could execute the Cruise function through a keyboard.
Please refer to the control keyboard Quick Guide for further
information.