Operation
53
6.1.3
Service switch
The service switch is located on the housing front of the control unit. Two switching positions are
available:
!
Note!
The service switch always has priority (Emergency Stop function). This means that any program
running is aborted as soon as the service switch is switched.
Ï
"CAL" takes you to the calibration menu to calibrate sensors.
F
With the "Enter" key, you proceed one step further in the menu or you
confirm the option selected.
LED lit
Green: Everything OK
Red: An error has occurred
VT
W
• You can use the arrow keys to scroll through the menu items and select
the option you require (if a choice is possible).
• Increase/decrease numbers by one level with "+" / "-". Go to the next
number with the "right arrow" (editor type 1) or
• ""Activate" with the "right arrow" and scroll through the option with "+"
/ "-" (editor type 2) (see the "Menu editor types" section on the editor
types)
Service/Off:
(horizontal switch setting)
• The sensor moves into the rinse chamber.
• "Hold" is active for the outputs.
Measure/On:
(vertical switch setting)
After moving out of the Service position, you are asked whether a program
should be started or whether the sensor should be moved into the process
without cleaning.
Only those programs are offered which have already been edited.
Summary of Contents for Topcal S CPC310
Page 161: ...Appendix 161 ...
Page 175: ......
Page 176: ...www endress com worldwide BA409C 07 en 11 06 Printed in Germany FM SGML 6 0 DT 71028144 ...
