Endress+Hauser Deltabar FMD72, Operating Instructions Manual

Page: 9 / 108

Deltabar FMD72 Basic safety instructions
9
Danger of burns from contact with surfaces!
►
For elevated fluid temperature, ensure protection against contact to prevent burns.
2.3 Workplace safety
For work on and with the device:
►
Wear the required personal protective equipment according to federal/national regulations.
►
Switch off the supply voltage before connecting the device.
2.4 Operational safety
Risk of injury!
►
Operate the device in proper technical condition and fail-safe condition only.
►
The operator is responsible for interference-free operation of the device.
Conversions to the device
Unauthorized modifications to the device are not permitted and can lead to unforeseeable dangers
►
If, despite this, modifications are required, consult with Hauser.
Repair
To ensure continued operational safety and reliability,
►
Carry out repairs on the device only if they are expressly permitted.
►
Observe federal/national regulations pertaining to repair of an electrical device.
►
Use original spare parts and accessories from Hauser only.
Hazardous area
To eliminate a danger for persons or for the facility when the device is used in the hazardous area
(e.g. explosion protection, pressure vessel safety):
►
Based on the nameplate, check whether the ordered device is permitted for the intended use in
the hazardous area.
►
Observe the specifications in the separate supplementary documentation that is an integral part
of these Instructions.
2.5 Product safety
This measuring device is designed in accordance with good engineering practice to meet state-of-
the- art safety requirements, has been tested, and left the factory in a condition in which they are
safe to operate.
It fulfills general safety requirements and legal requirements. It also conforms to the EC directives
listed in the device-specific EC declaration of conformity. Hauser confirms this fact by
applying the CE mark.