EMS HSD series User Manual Download

Page: 86 / 104

CONFIDENTIALITY STATEMENT

This document contains information that is private and Confidential, and is supplied on the express condition that it is not to be

used for any purpose other than the purpose for which it was issued, nor is it to be copied or communicated in whole or in part, to

any third party other than the recipient organization, without the prior written permission of EMS Technologies Canada, Ltd.

HSD Aeronautical Transceivers

Optimizing your system

The data rate performance varies due to the following
factors:

•

Satellite system or Internet congestion

•

Satellite communication properties (high transit
delays)

For best results:

•

Optimize both ends of the connection

•

Ensure that the protocol settings are identical on
both ends of your connection

•

Choose TCP/IP run over PPP as your protocol

•

Use Windows 2000 as an operating system

•

Check your modem manufacturer’s
configuration guidelines—changing the default
settings (e.g. window size) may improve data
transfer rates

Summary of Contents for HSD series









































































































Search results

Summary of Contents for HSD series

Reviews:

Related manuals for HSD series

Brands by name

Popular brands

EMS HSD series, User Manual

Search results

Summary of Contents for HSD series

Reviews:

Related manuals for HSD series

Brands by name

Popular brands