EMS HSD series User Manual Download

Page: 47 / 104

CONFIDENTIALITY STATEMENT

This document contains information that is private and Confidential, and is supplied on the express condition that it is not to be

used for any purpose other than the purpose for which it was issued, nor is it to be copied or communicated in whole or in part, to

any third party other than the recipient organization, without the prior written permission of EMS Technologies Canada, Ltd.

User’s Guide EMS-MN-1110-10048

The

Edit Extra Device

dialog box appears.

11. Verify that the

Device name

shows the terminal

adapter (Euro ISDN modem) you have installed, and
that the

Phone number

28#

, and then click

You return to the

Multilink

tab sheet.

12. To complete your dial-up connection configuration,

click

Your new Dial-up Connection to Internet is configured.
You are ready to access the Internet using the HSD
Transceiver.

Summary of Contents for HSD series









































































































Search results

Summary of Contents for HSD series

Reviews:

Related manuals for HSD series

Brands by name

Popular brands

EMS HSD series, User Manual

Search results

Summary of Contents for HSD series

Reviews:

Related manuals for HSD series

Brands by name

Popular brands