EMS HSD series User Manual Download Page 51

Page: 51 / 104

CONFIDENTIALITY STATEMENT

This document contains information that is private and Confidential, and is supplied on the express condition that it is not to be

used for any purpose other than the purpose for which it was issued, nor is it to be copied or communicated in whole or in part, to

any third party other than the recipient organization, without the prior written permission of EMS Technologies Canada, Ltd.

User’s Guide EMS-MN-1110-10048

To configure your new intranet dial-up
network connection:

1. In

Dial-up Networking

, with the

right mouse

button

click on the icon of your new intranet connection.

The

Connect

submenu appears.

2. Select

Properties

The

Properties

dialog box appears.

3. Click

the

General

tab.

Summary of Contents for HSD series









































































































Search results

Summary of Contents for HSD series

Reviews:

Related manuals for HSD series

Brands by name

Popular brands

EMS HSD series, User Manual

Search results

Summary of Contents for HSD series

Reviews:

Related manuals for HSD series

Brands by name

Popular brands