EMS HSD series User Manual Download

Page: 38 / 104

CONFIDENTIALITY STATEMENT

This document contains information that is private and Confidential, and is supplied on the express condition that it is not to be

used for any purpose other than the purpose for which it was issued, nor is it to be copied or communicated in whole or in part, to

any third party other than the recipient organization, without the prior written permission of EMS Technologies Canada, Ltd.

HSD Aeronautical Transceivers

If you are dialing a EURO ISDN phone number or a
North American ISDN number that has a “HUNT”
group assigned, then no changes are required to the
Dial-up networking set-up of the users computer.

The following screen illustrates a dial-up networking
connection with a “HUNT” group assigned.

Summary of Contents for HSD series









































































































Search results

Summary of Contents for HSD series

Reviews:

Related manuals for HSD series

Brands by name

Popular brands

EMS HSD series, User Manual

Search results

Summary of Contents for HSD series

Reviews:

Related manuals for HSD series

Brands by name

Popular brands