EMS HSD series User Manual Download Page 58

Page: 58 / 104

CONFIDENTIALITY STATEMENT

This document contains information that is private and Confidential, and is supplied on the express condition that it is not to be

used for any purpose other than the purpose for which it was issued, nor is it to be copied or communicated in whole or in part, to

any third party other than the recipient organization, without the prior written permission of EMS Technologies Canada, Ltd.

HSD Aeronautical Transceivers

Connecting to an intranet

This section provides basic instructions on how to connect
to remote networks (intranets).

If you have not set-up a dial-up networking connection for
this remote location, go to

Chapter 2, Getting Started,

and

follow the instructions provided for setting up a new
connection to a remote network.

Accessing your dial-up connections varies depending upon
which operating system you are using. Consult your
operating system help or user manual for specific
instructions.

The following procedure provides general instructions on
how to connect to an intranet.

The example provided uses Windows 98 for illustration
purposes only. Performance between operating systems
varies.

At the time of printing, Windows 2000 is the best
performer of Microsoft operating systems for use over
the satellite communications network.

Summary of Contents for HSD series









































































































Search results

Summary of Contents for HSD series

Reviews:

Brands by name

Popular brands

EMS HSD series, User Manual

Search results

Summary of Contents for HSD series

Reviews:

Brands by name

Popular brands