EMS HSD series User Manual Download Page 44

Page: 44 / 104

CONFIDENTIALITY STATEMENT

This document contains information that is private and Confidential, and is supplied on the express condition that it is not to be

used for any purpose other than the purpose for which it was issued, nor is it to be copied or communicated in whole or in part, to

any third party other than the recipient organization, without the prior written permission of EMS Technologies Canada, Ltd.

HSD Aeronautical Transceivers

To configure your new Internet dial-up
network connection:

1. In

Dial-up Networking

, with the

right mouse

button

click on the new connection you created for

Internet access.

The

Connect

submenu appears.

2. Select

Properties

The Properties dialog box for the Internet connection
you created appears.

3. Click

the

General

tab.

Summary of Contents for HSD series









































































































Search results

Summary of Contents for HSD series

Reviews:

Related manuals for HSD series

Brands by name

Popular brands

EMS HSD series, User Manual

Search results

Summary of Contents for HSD series

Reviews:

Related manuals for HSD series

Brands by name

Popular brands