EMS HSD series User Manual Download Page 66

Page: 66 / 104

CONFIDENTIALITY STATEMENT

This document contains information that is private and Confidential, and is supplied on the express condition that it is not to be

used for any purpose other than the purpose for which it was issued, nor is it to be copied or communicated in whole or in part, to

any third party other than the recipient organization, without the prior written permission of EMS Technologies Canada, Ltd.

HSD Aeronautical Transceivers

Placing air-to-ground voice calls

This section provides detailed instructions on how to place
a variety of air-to-ground voice calls.

Calling to North America

To place a voice call from air-to-ground to
North America:

1. Listen for dial tone before placing a call; it indicates

that the system is ready.

2. Dial

3. Dial

(the country code for North America).

4. Dial the area code, and then the telephone number.

5. Press

Area C

ode

Telephone

Number

The call is routed through the satellite link and the
Land Earth Station (LES) and connecting to the PSTN;
you may experience up to a 30 second delay before
your call rings through.

Summary of Contents for HSD series









































































































Search results

Summary of Contents for HSD series

Reviews:

Related manuals for HSD series

Brands by name

Popular brands

EMS HSD series, User Manual

Search results

Summary of Contents for HSD series

Reviews:

Related manuals for HSD series

Brands by name

Popular brands