EMS HSD series User Manual Download Page 2

Page: 2 / 104

CONFIDENTIALITY STATEMENT

This document contains information that is private and Confidential, and is supplied on the express condition that it is not to be

used for any purpose other than the purpose for which it was issued, nor is it to be copied or communicated in whole or in part, to

any third party other than the recipient organization, without the prior written permission of EMS Technologies Canada, Ltd.

HSD AERONAUTICAL TRANSCEIVERS

The information in this document is subject to change without notice,

and should not be construed as a commitment by EMS Technologies,
who reserve the right to make improvements to the product described

in this User’s Guide at any time and without notice.

No part of this document may be reproduced, transcribed, copied, or

translated by any means without the prior written consent of EMS

Technologies Canada.

The EMS logo is a trademark of EMS Technologies.

Microsoft, Windows, Windows 98 are registered trademarks or
trademarks of Microsoft Corporation. Other product and company
names herein may be the trademarks of their respective owners.

Revision

Sections

revised

Release

Date

Comments

All

22/03/02

Initial

Release

All

2/08/02

Release of combined
product document, addition
of bonded calls, low-speed
voice calls, revision of
initial release

HSD Aeronautical Transceivers
User's Guide
Document No. EMS-MN-1110-10048
Revision B
© EMS Technologies Canada
August 2, 2002

Summary of Contents for HSD series









































































































Search results

Summary of Contents for HSD series

Reviews:

Related manuals for HSD series

Brands by name

Popular brands

EMS HSD series, User Manual

Search results

Summary of Contents for HSD series

Reviews:

Related manuals for HSD series

Brands by name

Popular brands