EM12 User’s Manual
Appendix II
135
Code
Parameter Name
Setting range
Default
Property
b3-17 DI2 ON delay time
0.0s~3000.0s
0.0s
☆
b3-18 DI2 OFF delay time
0.0s~3000.0s
0.0s
☆
b3-19 DI3 ON delay time
0.0s~3000.0s
0.0s
☆
b3-20 DI3 OFF delay time
0.0s~3000.0s
0.0s
☆
b3-21 DI4 ON delay time
0.0s~3000.0s
0.0s
☆
b3-22 DI4 OFF delay time
0.0s~3000.0s
0.0s
☆
b3-23 DI5 ON delay time
0.0s~3000.0s
0.0s
☆
b3-24 DI5 OFF delay time
0.0s~3000.0s
0.0s
☆
b3-25 DI valid selection 1
Unit's digit: DI1 valid mode.
0: Low level valid
1: High level valid
Ten's digit: DI2 valid mode.
0, 1 (same as DI1)
Hundred's digit: DI3 valid mode.
0, 1 (same as DI1)
Thousand's digit: DI4 valid mode.
0, 1 (same as DI1)
Ten thousand's digit: DI5 valid mode.
0, 1 (same as DI1)
00000
★
b3-26 DI valid selection 2
Unit's digit: HDI valid mode.
0, 1 (same as DI1)
Ten's digit: DI7 valid mode.
0, 1 (same as DI1)
Hundred's digit: DI8 state.
0, 1 (same as DI1)
Thousand's digit: DI9 valid mode.
0, 1 (same as DI1)
Ten thousand's digit: DI10 valid mode.
0, 1 (same as DI1)
00000
★
Group b4: Switch Signal output Terminals
b4-00 FM terminal output mode
0: Pulse output (FMP)
1: Switch signal output (FMR)
0
☆
b4-01
FMR function (open-
collector output terminal)
0: No output
1: Ready signal
2: Frequency inverter running
3: Fault output (free stop fault)
4: Fault output (free stop fault, but do not output when
lower voltage)
5: Swing frequency limit
6: Torque limit
7: Frequency upper limit reached
8:Frequency lower limit reached (relevant to running)
9: Frequency lower limit reached (having output at
0
☆
b4-02
Relay 1 function
(TA1-TB1-TC1)
3
☆
Summary of Contents for EM12 Series
Page 5: ......
