5.Description of Function Codes
EM12 User's Manual
68
If a parameter needs to be displayed during the running, set the corresponding
bit to 1, and set b9-02 to the hexadecimal equivalent of this binary number.
b9-03
LED display running parameters 2
Default
H.0000
Setting Range
0000~FFFF:
If a parameter needs to be displayed during the running, set the corresponding
bit to 1, and set b9-03 to the hexadecimal equivalent of this binary number.
These two parameters are used to set the monitoring parameters that can be viewed when the frequency inverter is in
the running state. You can view a maximum of 32 running state. The displaying sequence is displayed from the
lowest bit of b9-02.
b9-04
LED display parameter of stopping
Default
H.0033
Setting Range
0000~FFFF:
Summary of Contents for EM12 Series
Page 5: ......
