8
Manual Supplement
00809-0300-4570, Rev BA
Rosemount 5708 Series 3D Solids Scanner Integration with DeltaV
2016
Rosemount 5708 Series 3D Solids Scanner Integration with DeltaV
15. Upload the new configuration. Right-click the desired VIM and select
Upload Configuration to
VIM
. Confirm the upload to the VIM by selecting
Yes
in the window that will appear, and save the
changes. Upon completion, a confirmation message should appear. The VIM configuration is now
complete.
Note
Anytime the Upload Configuration to VIM
routine is run, the 3DMultiVision server will stop communicating with
DeltaV. The server must be restarted or the
SCADA Configuration
window must be opened and acknowledged to see
values on DeltaV. The SCADA Definition can be found in the 3DMultiVision Client application under
Tools > Server
Options > SCADA Configuration
. Simply open the
SCADA Configuration
tab and select
Apply.
3.3
Configuring VIM card in DeltaV
1.
Open
DeltaV Explorer
and navigate to the controller connected to the VIM module.
2.
Expand the controller and right-click on
I/O
.
3.
Select
New Card
to add the serial card emulated by the VIM module. The
Add card
window opens.
4.
In the
Card class
list, select
Serial Cards
.
