Emerson Rosemount 3101, Reference Manual

Page: 59 / 240

47
Reference Manual
00809-0100-4840, Rev CB
Section 4: Starting up
February 2015
Starting up
4.4.10 Maximum contents (volume) entry (on the 3102/3105)
Screen display: Cont @ max
Default: 1.000
This menu option is only offered if the selected duty is Contents (Volume), and requires entry of
the maximum contents of the vessel.
Note
This menu option is in the programming menu. See Figure C-2 on page 103 for a map of the
menu structure and how to access the menu options.
To change the Cont@max value:
1. If entering the menu system from the PV display, press the green button

repeatedly
until the “Cont @ max” menu is indicated (see the above note).
2. Press the blue button

to enter the “Cont @ max” menu and display the present
Cont@max value.
3. If the Cont@max value is correct, press the red button

and then the green button

to
get to the next menu option. Otherwise, continue with step ( 4 )

4. Press the blue button

to start the editing mode. The first digit flashes to indicate it
can now be edited.
5. Press the green button

repeatedly to edit the flashing digit.
6. Press the blue button

to move to the next digit. The digit flashes to indicate it can be
edited.
7. Repeat steps ( 5 ) and ( 6 ) until the last digit is flashing, and edited as required.
8. Press the blue button

to confirm the new value. (The flashing stops).
9. Press the red button

to save if the new value is correct, or press the blue button

to
not save. Afterwards, depending on the button pressed, either the “Cont @ max” menu
or the next menu appears.