Emerson Rosemount 3101, Reference Manual

Page: 177 / 240

165
Reference Manual
00809-0100-4840, Rev CB
Appendix F: Programming the 3102 and 3105 using HART
February 2015
Programming the 3102 and 3105 using HART
F.3.22 RL1 PV on point (P071) on the Rosemount 3102
When relay RL1 is a control relay (default mode), this parameter defines the set-point where RL1
energizes.
The set-point where RL1 de-energizes is defined by RL1 PV Off Point (P072).
All relay set-point values must be entered in the units selected for the PV.
The
on point value may be greater or smaller than the Off point value.
Field Communicator or AMS Device
Manager
To view or change the damping
1. From the Home screen, select 2: Configure.
2. Select 2: Manual Setup.
3. Select 4: Relay Output.
4. Select 1: Relay 1.
5. Select 2: RL1 PV On Point P071.
6. If a change is required:
(a) Input a new value, and then select “ENTER” to save it.
(b) Select “Send” or “Apply” to update the transmitter.
Note
When messages appear, take appropriate action if needed and select “OK”.
Rosemount 3490 Series Control Unit
To view or change the damping
1. From the Main Menu screen, select SETUP.
2. Select the transmitter (e.g. “Tx1: 3102”).
3. Select OUTPUT.
4. Select RELAYS.
5. Select Relay 1.
6. Select RL1 On Point.
7. Follow the on-screen instructions to select the new mode.
(Use the Enter (
) key if prompted to change mode to “off-line”).
8. Select “Quit” to exit to the previous menu.
Fast Keys
2, 2, 4, 1, 2
RL1 PV On Point P071
0 ft
0
ESC DEL ENTER HELP
w
s
q
a
z
Lock
Shift
@ &
á ü x
e
d
c
r
f
v
t
g
b
y
h
n
u
j
m
*
-
+
/
.
0
7
4
1
8
5
2
9
6
3
i
k
o
l
FN
( Field Communicator Screen Shown )
RL1 On Point P071
0.00 ft
Esc=Quit =Edit
( Rosemount 3491 Screen Shown )