Emerson Rosemount 3051 CF Series, Reference Manual

Page: 11 / 146

2.2.3 Basic organization
Device information and tasks are organized into three different menu tree branches. They
are
Overview , Configure , and Service Tools . Information and tasks may be resident in more
than a single branch of the menu tree.
The device menu tree is the landing screen for the Handheld user interface. The device
menu tree is also permanently displayed on PC-based user interfaces. On PC-based user
interfaces, you can expand or collapse the menu tree as needed to facilitate navigation.
The same device menu tree applies for both handheld and PC-based user interfaces. On
the handheld, each menu tree entry has a dedicated screen (see
Figure 2-3 ). On PC-based
user interfaces, several menu tree entries may be displayed on a single screen with each
menu tree entry used as the heading for a section of that screen (see
Figure 2-2 ). The net
result is that you can use the menu tree to navigate all DD’s and DTM’s; however, you may
need to perform actions on one screen or several screens to perform the same task.
Figure 2-1: Configure Device Alerts-Multiple Screens
On devices with smaller screens the information and parameters necessary to complete a
task may be divided into several screens. In this figure, each category of alert to be
configured has a dedicated screen shown. There are four total screens used for alert
configuration.
Reference Manual Configuration
00809-0100-4774 July 2020
Reference Manual 11