Emerson Rosemount 2460, Reference Manual

Page: 139 / 240

127
Reference Manual
00809-0100-2460, Rev DE
Service and Troubleshooting
October 2018
Service and Troubleshooting
6.14 Network
The Network tab lets you configure the Rosemount 2460 for communication on the Ethernet port 1
(Eth1).
Figure 6-7. Network Configuration
Table 6-4. Network configuration
Menu Description
Mode
Available mode options are DHCP (dynamic IP address), Static and
Disabled. DHCP is not recommended for redundant systems.
IP Address
IP address in static mode (common IP Address in a redundant system).
Netmask
Netmask in static mode.
Gateway
Enter the gateway’s IP address in case the Rosemount 2460 is
connected to the host system via a gateway.
MAC address
MAC address of the network adapter.
Specific IP Address for
Primary Device
In a system with redundant system hubs, static IP address is
recommended. This field allows you to set a static IP address for the
Primary device in a redundant system.
Can be changed only if the "Redundancy" license option is enabled.
Specific IP Address for
Backup Device
In a system with redundant system hubs, static IP address is
recommended. This field allows you to set a static IP address for the
Backup device in a redundant system.
Can be changed only if the "Redundancy" license option is enabled.