User Manual
Chapter 4
GFK-2843A
Jan 2020
Assembly, removal, and electrical installation
25
Assembly
Important
•
Set the DIP switches prior to assembly (see "Setting the DIP switches" on page 23).
The DIP switches cannot be accessed when the safety module is installed in the
VersaPoint station.
•
Observe a mounting distance of 30 mm above and 40 mm below the safety module.
Shorter distances may inhibit proper handling during installation.
•
Disconnect the power to the station.
–
Snap on base
•
Before snapping on the safety module, remove the inserted connectors from the
safety terminal and the adjacent connectors from the neighboring VersaPoint
terminal on the left. This prevents the potential routing knife contacts and the
keyway/featherkey connections from being damaged.
•
Hold the safety module perpendicular and snap it onto the DIN rail (7.5 mm in
height).
Important
Ensure that all featherkeys and keyways on adjacent terminals are securely interlocked.
Figure 7: Snapping on the safety module base
•
Check that all the snap-on mechanisms are securely snapped into place.
–
Insert connectors
•
Insert the connectors in the specified order (A, B).
Important
Only use the connectors supplied with the module or connectors that are approved as
replacement items (see "Ordering data: accessories" on page 65).
