User Manual
Chapter 2
GFK-2843A
Jan 2020
Product description
16
2.8.4
Parameterization errors
Parameterization errors are indicated:
•
As long as the module is not parameterized
or
•
In the event of faulty parameterization
Parameterization errors cause the entire module to enter the safe state. The FS LED on the
safety module flashes.
In the event of faulty parameterization, the relevant diagnostic message is transmitted to
the controller (see "Parameterization errors" on page 53).
2.9
Process data words
The module occupies 24 words in the VersaPoint system. Use electronic device
descriptions (GSD, GSDML) in order to use the module in various networks.
2.10
Programming data/configuration data
2.10.1
Local bus
Operating mode
IC220SDL963
ID code
AB
hex
(171
dec
)
Length code
18hex (24
dec
)
Input address area
Application-specific
Output address area
Application-specific
Parameter channel (PCP)
0 words
Register length
24 words
2.10.2
Other bus systems or networks
Important
The programming data/configuration data is defined in the device description (GSD, GS-
DML) according to the bus or network used.
