User Manual
Appendix A
GFK-2843A
Jan 2020
VersaSafe system
83
Depending on the device type, the following errors result in the safe state:
•
Hardware fault in the circuit
•
User error
•
Module overload
•
Overheating
•
Faulty supply voltage
The corresponding error message is transmitted to the IC220SDL963 and the standard
control system.
Important
To determine which errors are detected by a specific device, please refer to the
corresponding device documentation.
A-6.3
Acknowledgment of error messages for satellites
Errors that occur on satellites are acknowledged via the standard control system on the
IC220SDL963 (see Section "IC220SDL963 system handling in various control systems" on
page 80). The acknowledgment is forwarded to the satellites.
Important
An example for the acknowledgment of error messages can be found in the quick start
guides for the IC220SDL963 (see Section "Ordering data: documentation" on page 66).
A-7
Configuration, parameterization, and
download
Important
An example for configuration, parameterization, and download can be found in the quick
start guides for the IC220SDL963 (see Section "Ordering data: documentation" on page
66).
A-7.1
Configuration and parameterization using the
VersaConf Safety software tool
The VersaConf Safety software tool is available to users for configuring the safety logic and
parameterizing the channels of the safety modules used. Configuration and
parameterization can be carried out offline, without connecting to the safety modules.
Configuration
During configuration, select the modules, set the island numbers, and connect the safety
function in VersaConf Safety.
