Emerson PACSystems RX3i, User Manual

Page: 121 / 164

RSTI-EP PROFINET I/O Controller User Manual Section 5
GFK-2571R May 2021
Diagnostics 114
Group-
Error Code
Description Cause Recommended Correction
13-h
10 PNC001
hardware failure. The PNC001 has
encountered a hardware
related failure.
Contact customer service.
135-s
11
PNC001 has
encountered a
critical fatal
error. A critical fatal error has
occurred during normal
PNC001 operation from
which
the PNC001
cannot recover.
Contact customer service.
140-i
12 PNC001 has
encountered a
non-critical
error. A non-critical error has
occurred on the PNC001. None. This fault is informational.
5.9.3 Faults Reported to the PACSystems I/O Fault Table
The following PROFINET Controller related faults are passed to the PACSystems CPU, where
they are reported in the I/O Fault Table of the CPU, in addition to being listed in the Local
Log Table of the PROFINET Controller.
Group/
Category/
Type/
Descriptor
Description Cause
Recommended
Correction
3-2-0-0 Loss of Device A configured
PROFINET
device is no
longer present
on the network.
If this is unexpected operation, either re-
connect missing PROFINET device on the
network, or remove the device from the
PROFINET Controller’s configuration.
Note
:
The network connection issue might
be in the interconnecting network
between the controller and the device,
and not necessarily at the device itself
In an MRP ring with many clients,
storing a configuration that causes all
clients to reconfigure (for example,
changing the Domain Name) may
generate many Loss/Addition of Device
faults. This is expected behavior and
all devices should automatically return
to operational.
10 h – Error code that provides more information about what part of the PNC’s hardware experienced a failure.
11 s – Error code that provides more information about what caused a fatal error on the PNC.
12 i – Error code that provides more information about a non-critical error.