Emerson Micro Motion 3711, Configuration And Use Manual, Page: 24 / 234

16 Micro Motion
®
Model 3711 Gas Flow Computers
System Configuration
Figure 3-1 Clock dialog box
3.3 Configuring security
Using ROCLINK 800 with the Model 3711 requires two types of security:
• Access to the ROCLINK 800 software (ROCLINK 800 security)
• Access to the COM ports on the Model 3711 (device security)
The ROCLINK 800 operator ID and password are required when you start the ROCLINK 800
program. The Model 3711 device operator ID and password are required when you connect to the
Model 3711 if device security is enabled on the com port that you are using.
3.3.1 ROCLINK 800 security
Up to 21 ROCLINK 800 operator IDs may be defined. To define a ROCLINK 800 operator ID:
1. Click Utilities > ROCLINK 800 Security . The dialog box shown in Figure 3-2 is displayed,
showing the default operator ID and password. This operator ID is used for initial setup of the
Model 3711.
Note: Access level 5 is required to open the ROCLINK 800 Security dialog box. If you want to change
security settings after initial setup is complete, you must use an operator ID with this access level.
Red circle