Emerson Micro Motion 3711 Configuration And Use Manual Download Page 105

Page: 105 / 234

Configuration and Use Manual

Monitoring and Displays

PID Contr

l Loops

db
us I

terface

Fu
ncti

Sequ

en
ce T

Monitoring and Displa

Figure 9-4

Display Editor window

2. In the Properties edit box:

Enter a name for this display.

If you want to use a background image, click in the

Picture

field and specify the image

file to be loaded. The image will be placed in the upper left corner of the window, and
cannot be moved or resized.

3. Add elements to the display as desired. To add an element, drag and drop it from the icon bar,

or right-click in the window and select from the list. Elements are defined in Table 9-2.

4. Using the Properties edit box, define properties for each element. The Properties edit box

displays different options for each element type.

5. Position and resize the elements as desired:

•

To resize elements manually, select the element, then grab a handle and drag, or click

SHIFT-Arrow Key

•

To move elements manually, select the element, then drag, or click

CTRL-Arrow Key

•

To align a group of elements, select the elements, then use the

Align

icon on the toolbar.

•

To resize a group of elements to match a single element, select the elements, then use the

Size

icon on the toolbar.

•

To adjust the spacing of a group of elements, select the elements, then use the

Vertical

Spacing

Horizontal Spacing

icon on the toolbar.

Properties edit box

New Display

Align

Test

Horizontal Spacing

Vertical Spacing

Lock Controls

Other Tools (Tab-Key Order)

Open Display

Save Display

Size

Custom display elements

Summary of Contents for Micro Motion 3711











































































































































































































































Search results

Summary of Contents for Micro Motion 3711

Reviews:

Emerson Micro Motion 3711, Configuration And Use Manual, Page: 105 / 234

Search results

Summary of Contents for Micro Motion 3711

Reviews: