Emerson Micro Motion 3711, Configuration And Use Manual, Page: 121 / 234

Configuration and Use Manual 113
Function Sequence Tables
PID Contr
o
l Loops
Mo
db
us I
n
terface
Fu
ncti
o
n
Sequ
en
ce T
a
b
le
s
Monitoring and Displa
ys
Step 3 Specify FST advanced parameters
This step is required only if your FST requires timing control or startup integer values.
Click Configure > Control > FST Register and open the Advanced panel. The panel shown in
Figure 11-4 is displayed.
Figure 11-4 FST Registers – Advanced panel
Table 11-1 FST Registers window – General parameters
Parameter Description Comments
Tag Used to identify the FST register point. 10 characters maximum. Optional.
Version Displays the version that was specified during FST download.
Description Displays the description that was specified during FST
download.
FST Status Displays the current state of the FST associated with this FST
register point.
To start or stop the associated FST, click the appropriate radio
button, then click Apply.
Registers
#1 – 10 Used to store floating-point values for this FST register point.
You can specify a start value manually, and the associated FST
can read and write values to these registers.