Emerson AMPGARD RVSS Instruction Booklet Download Page 63

Page: 63 / 169

EATON

www.eaton.com

Instruction Booklet

IB020003EN

Effective January 2021

AMPGARD RVSS

Reduced Voltage Soft-Starter

User Manual

Figure 87. Connect Ampgard RVSS device to Modbus Serial.

With the Ampgard RVSS device attached, the Modbus Serial - Set

Address window will appear. Use this window to set the BCM's

Modbus slave address on the Modbus serial bus. The default

address is 1, and unless that conflicts with some other device on

the serial bus, you can leave it as shown and click

Set

to save it. If

there is a conflict, assign another address (see

Figure 88

Figure 88. Modbus Serial - Set Address window (Modbus Slave

Address).

The final step in establishing Modbus serial communication is to

select the Ampgard RVSS device in the Network View, and then

click the

Connect

icon on the inControl DEVICE tab. This will initiate

communications between the inControl Ampgard RVSS device and

the PC inControl app using Modbus Serial. In all cases, the Slave

Address will be 1 when using one of the micro USB ports on the

C445. If using the RS-485 serial port, the node address of the C445

could be any value from 1to 253. If that is the case, the actual

address of the C445 must be entered here.

ote:

if using the USB/Micro USB connection: Following disconnecting the

software from the C445, the only way to connect to the C445 again is to also

disconnect the Modbus serial driver, then physically unplug the USB cable

from the computer, and then plug it in again. Connect to the C445 DTM again

as described above.

If the connection is

successful, the Ampgard RVSS device status

bar with go from gray to green. If

unsuccessful, the status bar

will go from gray to yellow (see

Figure 89

). In that case, check

your port settings on both sides - the Windows Device Manager

Port Properties Port Settings, and the inControl Modbus Serial

configuration. You can invoke the Modbus Serial configuration

window by double-clicking the Modbus Serial device in the Network

View window.

After correcting any mismatches, click

Connect

once again. When successful,

Ampgard RVSS device status bar will change from yellow to green (see

Figure 90

). Now you can download the BCM's current settings for review

and/or modification, or use inControl to input new settings, by first putting
them into the PC application and then downloading them to the BCM.

Summary of Contents for AMPGARD RVSS










































































































































































Search results

Summary of Contents for AMPGARD RVSS

Reviews:

Related manuals for AMPGARD RVSS

Brands by name

Popular brands

Emerson AMPGARD RVSS, Instruction Booklet

Search results

Summary of Contents for AMPGARD RVSS

Reviews:

Related manuals for AMPGARD RVSS

Brands by name

Popular brands